Part# FM148The Push To Open Bracket connects the gate opener to the gate post at an angle that allows the gate to swing away from the property.
SKU# FM316The Battery Heater helps keep gate opener batteries warm in cold climates.
Part# FM100The Keypad Mounting Post is designed to mount the Mighty Mule Keypads and Intercoms with Keypads, as well as other access control devices.
Part# FM132The FM132 push button control is an affordable, convenient way to activate any Mighty Mule Automatic Gate Opener from inside the property.
Part# FM133The Pin Lock helps provide security and peace of mind by preventing a gate opener arm from being removed or stolen and allowing unwanted access to the property.
Part# FM134The Keychain Transmitter is a two-button entry transmitter for Mighty Mule automatic gate openers.
Part# FM135Standard Mighty Mule single button entry transmitter.
Part# FM136The FM136 Wireless Intercom/Keypad is a versatile intercom system that allows for communication between a driver requesting entrance to the property, and a person inside of the property.
Part# FM137The Digital Keypad is designed to control access to all Mighty Mule automatic gate openers.
Part# FM138Direct burial Gate Opening Sensor (also referred to as a Probe, Vehicle Sensor or Exit Wand). Wires directly to the Gate Opener Control Box and senses metal in motion.
Part# FM143The Automatic Gate Lock provides peace of mind and added security for your gate. The Automatic Lock (FM143) unlocks and locks automatically as the gate is activated to open and close.
Part# FM145The Bulldog Pedestrian Gate Lock provides locking security of walk-through pedestrian gates. Ideal for protecting swimming pools, playgrounds, tennis courts, boat docks, etc. from unwanted access.
Part# R4222The Mighty Mule photo eyes are a non-contact photoelectric safety device for your gate opener that prevents the gate from closing when an obstruction is in the path of the beams.
Part# RB509-100100 feet of 16 gauge, multi-stranded, dual conductor Low Voltage Wire.
Part# RB509-250250 feet of 16 gauge, multi-stranded, dual conductor Low Voltage Wire.
Part# RB509-50This wire includes 50 feet of 16 gauge, multi-stranded, dual conductor Low Voltage Wire. It can be used for installing an AC transformer, solar panel, wireless intercom/keypad, or most other automatic gate opener accessories.
Part# RB509-500This wire includes 500 feet of 16 gauge, multi-stranded, dual conductor Low Voltage Wire. It can be used for installing an AC transformer, solar panel, wireless intercom/keypad, or most other automatic gate opener accessories.
Part# LOCKPCBAutomatic Gate Lock Control Board
Part# RB709U-NBThe RB709U-NB Garage Door Opener Adapter allows you to use the Mighty Mule Two Button Transmitter or Three Button Transmitter to operate your gate opener as well as your garage door opener.
SKU# FM123This 10 Watt Solar Panel is designed to charge the 12V battery that powers your Mighty Mule gate opener system.
Part# FM141Driveway vehicle sensor for your automatic gate openers. Detects mass metal in motion, then communicates with your gate opener control box, allowing for an easy exit.
SKU# RB743Standard Mighty Mule three button entry transmitter.
Pad for DC Slide Operators, Concrete Mount
Part# F102Surface Mount Plate for In-Ground Pedestal