Home > Replacement Parts > 500 Series >

Replacement Control Board for Automatic Gate Operators
Mighty Mule Replacement CircuitBoard - R4211
Mighty Mule Replacement Control Board
 

Price: $349.00



Mighty Mule Item: R4211
Qty:

Description Technical Specs Features
 
The R4211 control board is compatible with the Mighty Mule FM500/502, MM560/562 and MM600/660. This control board is a durable, flexible replacement for the circuit board in any of these gate openers. The R4211 control board is capable of handling single and dual gate installations. All Mighty Mule accessories will work with this board.

Average Customer Review: Average Customer Review: 4 of 5 4 of 5 Total Reviews: 14 Write a review.

  0 of 0 people found the following review helpful:
 
5 of 5 Replacement board June 12, 2020
Reviewer: Wayne Heider  
Everything fit and work  instructions help a lot

Was this review helpful to you?

  1 of 2 people found the following review helpful:
 
5 of 5 Circuit board. Great till storm kills it. May 8, 2019
Reviewer: Anonymous Person from Fountain Inn, SC United States  
see above

Was this review helpful to you?

  2 of 2 people found the following review helpful:
 
1 of 5 new control board reliability July 7, 2018
Reviewer: Nick Dundon from Bonney Lake, WA United States  
I purchased a new control board for my mm660 gate and installation was easy and successful. I completed all installation procedures.  I worked good for a couple of weeks then the gate opened one day for about 7 seconds then stopped and beeped three times.  It never did any thing till I activated the remote control and then it moved for another 3 seconds and stopped again with three beeps. I tested by swapping the actuator with a new one but it did the same thing again.  I did the install set up by the book and  finally got to where the gate closed.  The very next cycle it did the same thing again.  I have since disconnect the actuator so I could manually open the gate.  Note:  there is no binding of the gate at all when moving it by hand.  One push and it opens and one push closes the gate. I hope to talk to someone who can give me information to fix it or send me a new controller.

Was this review helpful to you?

  2 of 2 people found the following review helpful:
 
5 of 5 Product Review January 26, 2018
Reviewer: Jack from Florida  
My system was giving me 5 beeps which I never heard before,,,sometimes it worked ok but mostly not ,,,after chatting with tech support they told me my circuit card was shorted,,,I ordered one and got it within 2 days and after a simple remove and replacement of the card and a few minor adjustments I am good to go again,,,hopefully it lasts at the cost of $250

Was this review helpful to you?

  1 of 1 people found the following review helpful:
 
5 of 5 Control Board November 2, 2017
Reviewer: Walter Pinson from Lillington, NC United States  
Was very easy and understandable, unsnapped the snaps in my original box, disconnected all wires, used a piece of tape to ID all wires, pulled motherboard/control panel out, took New panel out of box and reversed all of the above procedures, Instructions are great and simple. My gate works like new now, if you're control box/panel starts beeping constantly and you reset it, works a couple days and keeps stopping, and finally stops altogether, it's time for a new Control Panel!!!

Was this review helpful to you?

View All Customer Reviews